New Direct Vent Eskabe Gas Wall Furnace

Burt Robertson, HVAC Marketing Manager

Yaun Company will be stocking the Eskabe direct vent wall furnace in two large sizes. These heaters are CSA and ANSI certified. The heater has a stylish and attractive rounded corner design with a charcoal grey grill, and a very light cream front cover. Eskabe offers the following two sizes which have a modulating thermostat. The DVEL12 with 11,000 input will heat a maximum of 275 sq. feet and the DVEL20 with 17,000 input will heat a maximum of 425 sq. feet. These units require no electricity and are great for remote areas which experience power outages. Another advantage for larger homes or commercial jobs is that the heat can be shut off in large areas and then heat only part of the area to save on fuel.

Both units are 20” tall. The DVEL12 is 17.375” wide and 5.75” deep the DVEL20 is 27.375” wide and 9.375” deep. The vent kit and wall mount bracket are all packaged in the box with the heater. The wall vent kit also provides the combustion air to the sealed combustion heater. The vent kit will work on a wall up to 12” thick. The DVEL12 requires a 6” hole and the DVEL20 requires a 7” hole. Please specify LP or Natural gas when ordering as they are not field convertible.