Hydronic Venting with SPIROVENT


 

Vent your problems away! Those in the hydronic heating or air conditioning business should know air can be the contractor’s worst enemy. Entrained air adds noise, causes corrosion and contributes to inefficiency by interfering with the water’s ability to transfer heat. Even carefully installed heating systems often result in unavoidable air pockets. Fresh water which is added during the routine purge cycle itself holds 5 to 10% dissolved air by volume. As a result, the process of purging the system to eliminate air actually introduces more air.Using an air eliminator such as a SPIROVENT™ can remove those air related problems. SPIROVENT does it all: Proper installation requires placing the SPIROVENT in the boiler supply line between the boiler and the circulator. In a chilled water system the unit should be installed in the chiller return line from the air handler on the suction side of the circulator. Vent your problems away!
Those in the hydronic heating or air conditioning business should know air can be the contractor’s worst enemy. Entrained air adds noise, causes corrosion and contributes to inefficiency by interfering with the water’s ability to transfer heat. Even carefully installed heating systems often result in unavoidable air pockets. Fresh water which is added during the routine purge cycle itself holds 5 to 10% dissolved air by volume. As a result, the process of purging the system to eliminate air actually introduces more air.

Copyright © 2002-2008 - Yaun Company Inc.
All Rights Reserved
Last Updated:02/09/2008
yaunco@yaunco.com